Most network faults come from a short list of causes. Checking them in a fixed order is faster than guessing, and software can do the first pass for you.

Start with reachability, not symptoms

Ask first whether the device answers ping and SNMP. If a whole branch is down, the cause is usually the one device or link above it, not forty separate faults. Topology-aware alerting groups those into one incident so you work the cause.

The usual suspects, in order

  1. Device offline: check power, uplink and the parent device before the device itself.
  2. High CPU or memory: look for loops, floods or a process that grew.
  3. Port errors (CRC, frame errors): suspect cable, connector or optics.
  4. Duplex or speed mismatch: a link negotiated at half duplex or 100 Mbps when it should be gigabit.
  5. Saturated link: compare utilisation with capacity and top talkers.
  6. Environment: temperature, fans, power supply and UPS battery.

What to read on the device

ReadingWhat it suggests
CRC errors rising on one portBad cable, connector or optic
Half duplex on an access portAuto-negotiation mismatch
CPU at 98% with normal trafficLoop, process or management-plane load
Uplink at 100 MbpsDamaged cable pair or wrong port setting
High jitter and packet lossCongestion or a failing link

Let the tool do the first pass

A fault advisor reads the live data for a device and lists what is wrong with probable causes, steps and vendor commands. It does not replace an engineer, but it shortens the time from alert to the first useful action.

NexoraUNMS has a rule-based device dashboard and Fault Advisor that lists faults with probable causes and how to fix them.

Network Device Dashboard & Fault AdvisorHow to Reduce Network Alert NoiseNexoraUNMS – Unified Network Management Software

See NexoraUNMS on a Live Demo Network

Watch monitoring, topology, alerts and configuration backup working together on sample data. Free demo from NexoraSoft; no obligation.

Book a Free Demo +91 98115 51004
Back to Blog